AIR-AP1252AG-C-K9 Cisco Aironet AP1252AG 300 Mbit/s Power over Ethernet (PoE)

Cisco Aironet AP1252AG. Maximum data transfer rate: 300 Mbit/s, Ethernet LAN data rates: 10,100,1000 Mbit/s, Frequency band: 2.412 - 2.472 GHz. Security algorithms: EAP-FAST, EAP-PEAP, EAP-SIM, EAP-TLS, MSCHAPv2, PEAP, WPA, WPA-AES, WPA-TKIP, WPA2. Power consumption (typical): 18.5 W, Power requirements: 100 - 240 VAC; 50 - 60 Hz. LED indicators: LAN, Certification: - FCC 15.247 - 15.407 - RSS-210 - EN 300.328 - EN 301.893 - ARIB-STD 33 - ARIB-STD 66 - ARIB-STD.... Antenna connector type: RP-TNC

Cisco Aironet 1250 Series Access Point

The Cisco® Aironet® 1250 Series is an enterprise-class 802.11n access point designed for challenging RF environments. A dual-band rugged indoor access point, the 1250 Series supports data rates of up to 600 Mbps to provide users with reliable and predictable coverage for high-bandwidth data, voice, and video applications.

RF Excellence
Building on the Cisco Aironet heritage of RF excellence, the 1250 Series delivers industry-leading performance for secure and reliable wireless connections. Enterprise-class silicon and optimized radios deliver a robust mobility experience using Cisco M-Drive technology, which includes:

- ClientLink improves reliability and coverage for legacy clients
- BandSelect improves 5-GHz client connections in mixed client environments
- VideoStream uses multicast to improve rich-media applications

All of these features ensure the best possible end-user experience on the wireless network.
Cisco also offers the industry's broadest selection of 802.11n antennas, delivering optimal coverage for a variety of deployment scenarios.
The Cisco Aironet 1250 Series is a component of the Cisco Unified Wireless Network, which can scale up to 18,000 access points with full Layer 3 mobility across central or remote locations on the enterprise campus, in branch offices, and at remote sites. The Cisco Unified Wireless Network is the industry's most flexible, resilient, and scalable architecture, delivering secure access to mobility services and applications and offering the lowest total cost of ownership and investment protection by integrating seamlessly with the existing wired network.

Power Options
With a Gigabit Ethernet (10/100/1000) interface, the Cisco Aironet 1250 Series offers the flexibility of inline as well as local power options. The Cisco Aironet 1250 Series Access Point can be powered by a Cisco Ethernet switch, a power injector, or a local power supply. The number of radio modules determines which Cisco Ethernet switch can power the Aironet 1250 Series Access Point.

Powering the Aironet 1250 Series Access Point with 802.3af Power over Ethernet
The Aironet 1250 Series Access Point with one RM1252 radio module installed requires 12.95W, which is within the 802.3af Power over Ethernet (PoE) standard. Any Cisco switch supporting 802.3af may be used to power the Aironet 1250 Series Access Point with one RM1252 radio module installed. This is ideal for businesses that chose to only deploy on a single frequency (2.4 GHz or 5 GHz). A single radio provides optimum performance with approximately 300 Mbps maximum PHY data rate. Customers who deploy dual-band, 802.11n radios and power the 1250 Series using standard 802.3af will have more reliable and predictable coverage than that provided by traditional 802.11a/g networks; however, operation will be limited to a single transmitter per radio with maximum PHY data rates of 150 Mbps instead of 300 Mbps per radio. Customers with a significant investment in 802.11 a/b/g client devices that have low-to-medium bandwidth needs but high-reliability requirements will benefit the most from this type of deployment scenario.

Powering the Aironet 1250 Series Access Point with Cisco Enhanced PoE
Cisco Enhanced PoE was designed for customers who want to install new PoE-enabled technologies that require greater than 15.4W per port to function at full capability, such as wireless technology based on the IEEE 802.11n standard. Cisco Enhanced PoE provides the full power requirements for dual-radio modules and eliminates the need to run an additional cabling drop or insert a separate power injector. Support for Enhanced PoE is currently available on a variety of Cisco Catalyst® switching platforms.

Warranty: Limited Lifetime Hardware Warranty, 10-day advance hardware replacement, software media - 90 days