C6800-16P10G-XL= Cisco C6800-16P10G-XL network switch module

SKU
C6800-16P10G-XL=
Catalyst 6800 16-port 10GE with integrated DFC4-XL, Spare

Cisco C6800-16P10G-XL. Ethernet LAN data rates: 10000 Mbit/s, Networking standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad, IEEE 802.3ak, IEEE.... MAC address table: 128000 entries, Switching capacity: 80 Gbit/s, Data transfer rate: 10 Gbit/s. Buffer size per port: 2.5 MB, Compatibility: Cisco Catalyst 6800. Management platform: ETHERLIKE-MIB (RFC 1643), IF-MIB (RFC 1573), Bridge MIB (RFC 1493), CISCO-STACK-MIB,.... Safety: UL 60950-1, CAN/CSA C22.2 No. 60950, EN 60950-1, IEC 60950-1, AS/NZS 60950-1, IEC 60825 Class 1,..., Electromagnetic compatibility: FCC Part 15 (CFR 47) Class A, ICES-003 Class A, VCCI Class A, EN55022 Class A, EN55024, CISPR24,...

The Cisco Catalyst® 6800 Family Switches offer a variety of 10-Gigabit Ethernet modules. Working in conjunction with the Catalyst® 6500-E/6807-XL Supervisor Engine 2T/2TXL (VS-S2T-10G & VS-S2T-10GXL), they can serve different needs on campus deployments. The family includes three modules: the Catalyst 6800 32-port, 16-port, and 8-port 10-Gigabit Ethernet Fiber Modules.

The modules support hardware-based multicast replication, quality of service (QoS), access control lists (ACLs), jumbo frames, and low latency to enable secure and predictable performance for bandwidth-intensive applications. All three share a common ASIC architecture and support the same set of features in hardware. They support Small Form-Factor Pluggable (SFP/SFP+), 10/100/1000M GLC-T (1G copper SFP) transceivers, and 100M FX. The modules are designed to meet the increasing demand for aggregation of 10-Gigabit Ethernet streams in campus deployments, as well as for high-density 10-Gigabit Ethernet transport in the core.

The modules consist of port groups of eight ports each. The 32-port and 16-port modules can operate in either of two modes: 1) oversubscribed mode (default), which provides for maximum port density, using all of the ports with 2:1 oversubscription; and 2) performance mode, which uses half of the ports, enabling line rates and double the port buffer size. The mode of operation can be changed for each eight-port port-group (mixed mode), and is described in more detail in the following sections. The eight-port 10-Gigabit Ethernet Module always operates in performance mode.

The modules are based on the WS-X6904-40G module and provide the same level of advanced enterprise features and large table sizes that have proven essential to successful operation as a campus aggregation or core switch. They include hardware features such as Virtual Switching System (VSS), Instant Access (IA), Location ID Separation Protocol (LISP), Security Group Tagging (SGT) and Access Control (SGACL), MACsec (802.1ae), traffic shaping, and hierarchical quality of service (HQoS), among others. The line cards are also the first to launch with front-facing passive UHF RFID technology, providing the latest Auto-ID capabilities for asset management.

The C6800 Family 16-port 10-Gigabit Ethernet fiber module is suitable for deployment in all campus aggregation and core networks.
- Two models: C6800-16P10G, a 16-port 10-Gigabit Ethernet Fiber Module with DFC4 (Figure 2), and C6800-16P10G-XL, a16-port 10-Gigabit Ethernet Fiber Module with DFC4XL
- Backplane connection: 80-Gbps backplane bandwidth in Catalyst 6807-XL and 6500-E chassis
- Chassis/slot support: Can occupy slots 1-2 and 5-7 in a Cisco Catalyst 6807-XL. Can occupy any slot in Cisco Catalyst 6503E, 6504E, 6506E, 6509E, and 6509-V-E. Can occupy slots 1-6 and 9-13 in a Cisco Catalyst 6513-E
- Supervisor engine: Compatible with Supervisor Engine 2T and Supervisor Engine 2TXL
- Distributed forwarding and performance: Comes equipped with a factory-installed DFC4-E or DFC4-EXL daughter card

The C6800 Family 16-port 10-Gigabit Ethernet Fiber Module provides up to 80 10-Gigabit Ethernet fiber ports in a single Cisco Catalyst 6807-XL Switch chassis, or up to 160 10-Gigabit Ethernet fiber ports in a Cisco Catalyst 6807-XL Virtual Switching System (VSS) 2T. It also provides up to 176 10-Gigabit Ethernet Fiber ports in a single Cisco Catalyst 6513-E Switch chassis or up to 352 10-Gigabit Ethernet Fiber ports in a Cisco Catalyst 6500 Virtual Switching System (VSS) 2T.

More Information
Ethernet LAN data rates 10000 Mbit/s
Jumbo frames support Y
Networking standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad, IEEE 802.3ak, IEEE 802.3an, IEEE 802.3aq, IEEE 802.3x
Ethernet LAN (RJ-45) ports 16
Compatibility Cisco Catalyst 6800
Buffer size per port 2.5 MB
MAC address table 128000 entries
Forwarding rate 60 Mpps
Number of VLANs 4000
Switching capacity 80 Gbit/s
Data transfer rate 10 Gbit/s
Bandwidth 80 Gbit/s
Quality of Service (QoS) support Y
Management platform ETHERLIKE-MIB (RFC 1643), IF-MIB (RFC 1573), Bridge MIB (RFC 1493), CISCO-STACK-MIB, CISCO-VTP-MIB, CISCO-CDP-MIB, RMON MIB (RFC 1757), CISCO-PAGP-MIB, CISCO-STP-EXTENSIONS-MIB, CISCO-VLAN-BRIDGE-MIB, CISCO-VLAN-MEMBERSHIP-MIB, ENTITY-MIB (RFC 2037), HC-R
Access Control List (ACL) Y
Operating temperature (T-T) 0 - 40 °C
Storage temperature (T-T) -40 - 75 °C
Operating relative humidity (H-H) 10 - 90%
Operating altitude -150 - 3000 m
Operating temperature (T-T) 32 - 104 °F
Width 391.1 mm
Depth 416.5 mm
Height 43.9 mm
Weight 5 kg
Safety UL 60950-1, CAN/CSA C22.2 No. 60950, EN 60950-1, IEC 60950-1, AS/NZS 60950-1, IEC 60825 Class 1, EN 60825 Class 1, 21CFR 1040
Electromagnetic compatibility FCC Part 15 (CFR 47) Class A, ICES-003 Class A, VCCI Class A, EN55022 Class A, EN55024, CISPR24, CISPR 22 Class A, AS/NZS CISPR 22 Class A, ETS 300 386, KN 22 Class A, EN 50082-1, EN61000-3-2, EN61000-3-3, EN61000-6-1, CNS13438 Class A, KN6100 -4 Series
Harmonized System (HS) code 85176990
Write Your Own Review
You're reviewing:C6800-16P10G-XL= Cisco C6800-16P10G-XL network switch module

WARRANTY, RETURNS AND ADDITIONAL INFORMATION

Guarantee

Limited Warranty period (spare parts): 1 year
Limited Warranty period (labour): 1 year
Support Phone: 00971585548148
Read all the details

 

Return Policy

Return for return within three days
Return for replacement within three days
Technivision covers this item under Standard Return Policy

 

Delivery

Out-of-stock labelled product products ready for delivery within 2-4 working days in UAE.
For non-existing items, it will take a maximum of 4-6 weeks with a return to Back Orders.
Sales Phone: 00971 58 5548148
Chat With Us Now

More to see
Back to Top