JG726A Hewlett Packard Enterprise 5930-32QSFP+ Managed L3 Black
Hewlett Packard Enterprise 5930-32QSFP+. Switch type: Managed, Switch layer: L3. USB 2.0 ports quantity: 1. Switching capacity: 2560 Gbit/s. Rack mounting
The HP FlexFabric 5930 Switch Series is a family of high-density, ultra-low-latency, top-of-rack (ToR) switches that is part of the HP FlexNetwork architecture's HP FlexFabric solution. Ideally suited for deployment at the aggregation or server access layer of large enterprise data centers, the HP 5930 Switch Series is also powerful enough for deployment at the data center core layer of medium-sized enterprises.
With the increase in virtualized applications and server-to-server traffic, customers now require spine and ToR switch innovations that will meet their needs for higher-performance server connectivity, convergence of Ethernet and storage traffic, the capability to handle virtual environments, and ultra-low-latency all in a single device- the HP FlexFabric 5930 Switch Series.
Features
Quality of Service (QoS)
Powerful QoS features: Flexible classification: creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS) precedence; supports filter, redirect, mirror, remark, and logging. Feature support: provides support for Strict Priority Queuing (SP), Weighted Fair Queuing (WFQ), Weighted Deficit Round Robin (WDRR), SP+WDRR together, configurable buffers, Explicit Congestion Notification (ECN), and Weighted Random Early Detection (WRED).
Data center optimized
Flexible high port density: the HP FlexFabric 5930 Switch Series enables scaling of the server edge with 40GbE spine and ToR deployments to new heights with high-density 32-port solutions delivered in a 1RU design. Each 40 GbE QSFP+ port can also be configured as four 10GbE ports by using a 40-GbE-to-10GbE splitter cable.
High-performance switching: cut-through and nonblocking architecture delivers low latency (~1 microsecond for 10GbE) for very demanding enterprise applications; the switch delivers high-performance switching capacity and wire-speed packet forwarding
Higher scalability: HP Intelligent Resilient Framework (IRF) technology simplifies the architecture of server access networks; up to four HP 5930 switches can be combined to deliver unmatched scalability of virtualized access layer switches and flatter two-tier networks using IRF, which reduces cost and complexity
Advanced modular operating system: Comware v7 software's modular design and multiple processes bring native high stability, independent process monitoring, and restart; the OS also allows individual software modules to be upgraded for higher availability and supports enhanced serviceability functions like hitless software upgrades with single-chassis ISSU
TRILL and EVB/VEPA: TRansparent Interconnection of Lots of Links (TRILL) is supported to increase the scale of enterprise data centers; Edge Virtual Bridging with Virtual Ethernet Port Aggregator (EVB/VEPA) provides connectivity into the virtual environment for a data center-ready environment
Manageability
Full-featured console: provides complete control of the switch with a familiar CLI
Troubleshooting: Ingress and egress port monitoring: enable network problem solving. Traceroute and ping: enable testing of network connectivity.
Multiple configuration files: allow multiple configuration files to be stored to a flash image
sFlow (RFC 3176): provides wire-speed traffic accounting and monitoring
SNMP v1, v2c and v3: facilitate centralized discovery, monitoring, and secure management of networking devices
Resiliency and high availability
HP Intelligent Resilient Framework (IRF) technology: enables an HP FlexFabric to deliver resilient, scalable, and secured data center networks for physical and virtualized environments; groups up to four HP 5930 switches in an IRF configuration, allowing them to be configured and managed as a single switch with a single IP address; simplifies ToR deployment and management, reducing data center deployment and operating expenses
IEEE 802.1w Rapid Convergence Spanning Tree Protocol: increases network uptime through faster recovery from failed links
IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing multiple spanning trees
Virtual Router Redundancy Protocol (VRRP): allows groups of two routers to dynamically back each other up to create highly available routed environments
Hitless patch upgrades: allows patches and new service features to be installed without restarting the equipment, increasing network uptime and facilitating maintenance
Warranty: 1 year, advance replacement, 10 calendar day, phone support, software releases
Brand | Hewlett Packard Enterprise |
---|---|
Rack mounting | Y |
Stackable | Y |
Product colour | Black |
Switch type | Managed |
Switch layer | L3 |
USB 2.0 ports quantity | 1 |
Switching capacity | 2560 Gbit/s |
Throughput | 1905 Mpps |
Packet buffer memory | 12.2 MB |
Memory type | SDRAM |
Internal memory | 4096 MB |
Flash memory | 512 MB |
AC input frequency | 50 - 60 Hz |
Power supply included | N |
Power over Ethernet (PoE) | N |
Width | 440 mm |
Depth | 660 mm |
Height | 43.7 mm |
Weight | 13 kg |
WARRANTY, RETURNS AND ADDITIONAL INFORMATION
Guarantee
Limited Warranty period (spare parts): 1 year
Limited Warranty period (labour): 1 year
Support Phone: 00971585548148
Read all the details
Return Policy
Return for return within three days
Return for replacement within three days
Technivision covers this item under Standard Return Policy
Delivery
Out-of-stock labelled product products ready for delivery within 2-4 working days in UAE.
For non-existing items, it will take a maximum of 4-6 weeks with a return to Back Orders.
Sales Phone: 00971 58 5548148
Chat With Us Now