WS-C3560V2-48PS-E Cisco WS-C3560V2-48PS-E network switch Managed Power over Ethernet (PoE)

SKU
WS-C3560V2-48PS-E
48 Ethernet 10/100 ports + PoE & 4 SFP Gigabit Ethernet ports, 370W available for PoE, allowing full 15.4W for up to 24 ports, 1RU, IPv6, IP Services software feature set

Cisco WS-C3560V2-48PS-E. Switch type: Managed. Basic switching RJ-45 Ethernet ports quantity: 48. Full duplex, Networking standards: IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE.... Power over Ethernet (PoE)

The Cisco® Catalyst® 3560 v2 Series is the next-generation energy-efficient Layer 3 fast Ethernet switches. This new series of switches supports Cisco EnergyWise technology, which enables companies to measure and manage power consumption of network infrastructure and network-attached devices, thereby reducing their energy costs and their carbon footprint. The Cisco Catalyst 3560 v2 Series consumes less power than its predecessors and is the ideal access layer switch for enterprise, retail, and branch-office environments, as it maximizes productivity and investment protection by enabling a unified network for data, voice, and video.

Cisco Catalyst 3560 v2 Series Highlights
-Lower power consumption than its predecessors.
-Backward compatible - uses the same Cisco IOS® Software image as the 3560 series and has the same feature set.
-Full EnergyWise support to monitor energy consumption of network infrastructure and implement energy saving programs to reduce energy costs.
-Compatible with Cisco Redundant Power System (RPS) 2300.
-All units have a uniform depth of 11.9 inches for better cable management.
-Preconfigurable with the Cisco IOS Software release at the time of ordering.
-IPv6 routing included in the IP Services feature set.
-DC powered stand-alone model.

Cisco Catalyst 3560 v2 Series Software
The Cisco Catalyst 3560 v2 Series can be purchased with the IP Base or IP Services licenses preinstalled. The IP Base license offers advanced QoS, rate limiting, ACLs, and basic static and Routing Information Protocol (RIP) routing functions. The IP Services license provides a richer set of enterprise-class features, including advanced hardware-based IP unicast and IP Multicast routing as well as policy-based routing (PBR). The Advanced IP Services license, which includes IPv6 routing and IPv6 ACL support, is now included in the IP Services license. Upgrade licenses are available to upgrade a switch from the IP Base license to the IP Services license.

Configurable Cisco IOS Software
The Cisco Catalyst 3560 v2 Series can be preconfigured with a specific Cisco IOS Software release at the time of ordering. This option eliminates the need to reload a specific Cisco IOS Software release during deployment, thereby reducing deployment time and cost. The Cisco IOS Software release to be preloaded can be selected from a list of supported Cisco IOS Software releases, including the crypto version.

Cisco EnergyWise
The Cisco Catalyst 3560 v2 series support Cisco EnergyWise, which is a technology that enables monitoring, reporting, and management of energy consumption by end devices that are Cisco EnergyWise enabled. This technology enables companies to reduce their energy cost and carbon footprint. These are some of the EnergyWise features available:

-Discover all Cisco EnergyWise enabled devices on the network.
-Monitor and report power consumption by these devices.
-Implement business rules to control power to these end devices.

Power over Ethernet
The Cisco Catalyst 3560 v2 Series can provide a lower total cost of ownership (TCO) for deployments that incorporate Cisco IP phones, Cisco Aironet® wireless LAN (WLAN) access points, or any IEEE 802.3af-compliant end device. PoE eliminates the need for wall power outlets for each PoE-enabled device and significantly reduces the cost for additional electrical cabling that would otherwise be necessary in IP phone and WLAN deployments. The Cisco Catalyst 3560 v2 24-port PoE switch can support Class 3 PoE or 15.4W of PoE power on all 24 ports. Taking advantage of Cisco Catalyst Intelligent Power Management, the Cisco Catalyst 3560 v2 48-port PoE configurations can deliver the necessary power to support 24 ports at 15.4W, 48 ports at 7.7W, or any combination in between. Maximum power availability for a converged voice and data network is attainable when a Cisco Catalyst 3560 v2 series switch is combined with the Cisco Redundant Power System 2300 (RPS 2300) for protection against internal power supply failures and an uninterruptible power supply (UPS) system to safeguard against power outages.

Redundant Power System
The Cisco Catalyst 3560 v2 Series access switches support the new generation of Cisco RPS 2300, which increases availability in a converged data, voice, and video network by providing transparent power backup to two of six attached Cisco Catalyst 3560 v2 Series Switches at the same time. The Cisco Catalyst 3560 v2 Series switches are capable of reverting back to their internal power supply without any service interruption. In addition, the RPS 2300 can be managed via a Cisco Catalyst 3560 v2 Series switch that is connected to the RPS 2300.

More Information
Stackable N
Safety UL 60950-1, CUL to CAN/CSA 22.2 No. 60950-1, TUV/GS to EN 60950-1, CB to IEC 60950-1, NOM, CE Marking
MIB support BRIDGE-MIB, CISCO-CDP-MIB, CISCO-CLUSTER-MIB, CISCO-CONFIG-MAN-MIB, CISCO-ENTITY-FRU-CONTROL-MIB, CISCO-ENVMON-MIB, CISCO-FLASH-MIB, CISCO-FTP-CLIENT-MIB, CISCO-HSRP-MIB, CISCO-HSRP-EXT-MIB, CISCO-IGMP-FILTER-MIB, CISCO-IMAGE-MIB, CISCO-IP-STAT-MIB, CISCO
Switch type Managed
Quality of Service (QoS) support Y
SFP module slots quantity 4
SFP/SFP+ slots quantity 4
Basic switching RJ-45 Ethernet ports quantity 48
Networking standards IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x
Full duplex Y
Link aggregation Y
Broadcast storm control Y
Rate limiting Y
Auto MDI/MDI-X Y
Spanning tree protocol Y
Number of VLANs 1000
IP routing Y
Supported data transfer rates 10/100/1000 Mbps
Maximum data transfer rate 1 Gbit/s
Jumbo frames support Y
MAC address filtering Y
DHCP features DHCP server
Access Control List (ACL) Y
IGMP snooping Y
SSH/SSL support Y
Multicast support Y
Flash memory 32 MB
Noise level 45 dB
Mean time between failures (MTBF) 275360 h
Input current 2 - 5 A
Input voltage 100 - 240 V
Redundant power supply (RPS) support Y
Power consumption (typical) 452 W
Power over Ethernet (PoE) Y
Operating temperature (T-T) 32 - 113 °F
Operating temperature (T-T) 0 - 45 °C
Storage temperature (T-T) -25 - 70 °C
Operating relative humidity (H-H) 10 - 85%
Storage relative humidity (H-H) 10 - 85%
Operating altitude 0 - 3000 m
Non-operating altitude 0 - 4573 m
Heat dissipation 1548 BTU/h
Weight 5 kg
Dimensions (W x D x H) (imperial) 443.5 x 295.1 x 43.9 mm (17.5 x 11.6 x 1.73")
Bandwidth 8 Gbit/s
Dimensions (WxDxH) 443 x 295 x 44 mm
Connectivity technology Wired
Networking features Ethernet, Fast Ethernet, Gigabit Ethernet
Input frequency 50/60 Hz
Weight (imperial) 4.99 kg (11 lbs)
Acoustic pressure emissions 5.5 dB
Connectivity LEDs Y
Electromagnetic emissions FCC P 15 Class A, EN 55022 Class A (CISPR22), EN 55024 (CISPR24), AS/NZS CISPR22 Class A, CE, KCC, GOST
Management protocols SNMP, SNMPv2, SNMPv3, RMON, Telnet, DNS, TACACS+, RADIUS
Write Your Own Review
You're reviewing:WS-C3560V2-48PS-E Cisco WS-C3560V2-48PS-E network switch Managed Power over Ethernet (PoE)

WARRANTY, RETURNS AND ADDITIONAL INFORMATION

Guarantee

Limited Warranty period (spare parts): 1 year
Limited Warranty period (labour): 1 year
Support Phone: 00971585548148
Read all the details

 

Return Policy

Return for return within three days
Return for replacement within three days
Technivision covers this item under Standard Return Policy

 

Delivery

Out-of-stock labelled product products ready for delivery within 2-4 working days in UAE.
For non-existing items, it will take a maximum of 4-6 weeks with a return to Back Orders.
Sales Phone: 00971 58 5548148
Chat With Us Now

More to see
Back to Top